Objective Matrix Analysis to Measure the Productivity of Lunch Box Maker Machines in Height Copy Digital Printing

Article Sidebar

PDF
Issue
Vol. 1 No. 2 (2025): Tech
Published: Sep 3, 2025
Keywords:
Objective Matrix, Productivity, Traffic Light System. Objective Matrix, Produktivitas, Sistem Lampu Lalu Lintas

Main Article Content

Isnaini Faizi
Jakarta State Polytechnic
Ika Riswi Aprilia
Rahma Wati

Abstract

Height Copy & Digital Print is a company engaged in the creative industry in the form of printing services located in Depok. Improving efficiency, effectiveness, and competitiveness is essential for the printing industry to produce quality products, reduce costs, and increase revenue. This can be achieved through productivity measurement. This study aims to measure productivity using the Objective Matrix (OMAX) method during the period from July 2023 to June 2024. The results show that the highest productivity occurred in May 2024 with a score of 804, while the lowest productivity was 184 in August 2023. The productivity index experienced the highest increase of 78.10% in August 2023 and the greatest decrease of -27.57% in December 2023 compared to the previous period. The productivity index against the standard productivity also recorded the highest increase of 167.84% in April 2024 and the lowest decrease of -38.60% in July 2023. The analysis results using the Traffic Light System indicate that the criterion of minimizing defective products has not contributed significantly to productivity improvement, as it recorded 11 red indicator data points.

Article Details

How to Cite
Faizi, I., Ika Riswi Aprilia, & Rahma Wati. (2025). Objective Matrix Analysis to Measure the Productivity of Lunch Box Maker Machines in Height Copy Digital Printing. Tech : Journal of Engineering Science, 1(2), 111–127. https://doi.org/10.69836/tech.v1i2.478
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

References

Basori, F. I., Muflihah, N., Ghani, S. R. W., & Afiatna, F. A. N. F. (2022). Analisis produktivitas dengan metode Objective Matrix (OMAX) di home industri X. Jurnal Penelitian Bidang Inovasi & Pengelolaan Industri, 1(2), 14–23.

Baiti, K. N., Djumali, D., & Kustiyah, E. (2020). Produktivitas Kerja Karyawan Ditinjau dari Motivasi, Disiplin Kerja dan Lingkungan pada PT. Iskandar Indah Printing Textile Surakarta. Jurnal Ilmiah Edunomika, 4(01), 460548.

Busro, M. (2018). Teori-teori manajemen sumber daya manusia (Edisi pertama, Cetakan kesatu). Jakarta: Praneda Media Group.

Fitriady, M. Y. (2017). Strategi pengembangan usaha percetakan Eka Mulia Jati (EMJ) Production (Studi kasus usaha industri kecil percetakan EMJ Production di Desa Cempaka Putih, Kecamatan Ciputat Timur Tangerang Selatan). PRINTPACK, 1(1).

Indarwati, P., Narto, N., & Tarigan, Z. J. H. (2017). Perancangan sistem pengukuran kinerja menggunakan metode PRISM performance (Studi kasus di PT. Polowijo). In Prosiding Seminar Sains Nasional dan Teknologi, 1(1).

Komariah, I. (2019). Pengukuran produktivitas lantai produksi menggunakan metode Objective Matrix (OMAX) di PT. XYZ. Jurnal Industrial Galuh, 1(1), 16–21.

Mukti, A. R., A’yun, Q., & Suparto, S. (2021). Analisis produktivitas menggunakan metode Objective Matrix (OMAX) (Studi kasus: Departemen Produksi PT Elang Jagad). Jurnal Teknologi dan Manajemen, 2(1), 13–18.

Ningsih, N. A., & Astuti, R. D. (2022). Analisis pengukuran kinerja produksi loom dengan metode OMAX scoring system pada unit weaving PT. Dan Liris. In Seminar dan Konferensi Nasional IDEC 2022 (pp. 1–9).

Nurcahyani, N. (2013). Pengaruh penerapan good corporate governance dan kepemilikan institusional terhadap kinerja keuangan (Studi pada perusahaan peserta CGPI yang terdaftar di BEI tahun 2009–2011) (Disertasi doktoral, Universitas Brawijaya).

Prayoga, I. G., & Suseno, A. (2023). Analisis produktivitas tenaga kerja terhadap hasil produksi di CV. Mulia Tata Sejahtera. Jurnal Serambi Engineering, 8(2).

Putera, D., Dermawan, A. A., Ilham, W., & Rini, R. R. O. P. (2022). Pengukuran kinerja perusahaan briket dengan pendekatan Objective Matrix (OMAX) pada PT. XYZ. Jurnal Manajemen Rekayasa dan Inovasi Bisnis, 1(1), 21–33.

Ramadhan, F. F., & Nugroho, A. J. (2023). Pengukuran produktivitas beton ready mix dengan metode OMAX (Objective Matrix). Jurnal Ilmiah Teknik Mesin, Elektro dan Komputer, 3(2), 245–257.

Ramayanti, G., Sastraguntara, G., & Supriyadi, S. (2020). Analisis produktivitas dengan metode Objective Matrix (OMAX) di lantai produksi perusahaan botol minuman. Jurnal INTECH Teknik Industri Universitas Serang Raya, 6(1), 31–38.

Setiowati, R. (2017). Analisis pengukuran produktivitas departemen produksi dengan metode Objective Matrix (OMAX) pada CV. Jaya Mandiri. Fakt. Exacta, 10(3), 199–209.

Sudiman, S., & Fahrudin, W. A. (2021). Perancangan efektivitas dan efisiensi untuk peningkatan produktivitas lini produksi wellhead dengan metode Objective Matrix. Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 15–22.

Supriyadi, S., & Suryadiredja, A. D. (2020). Pengukuran produktivitas lini produksi gula rafinasi dengan pendekatan Objective Matrix (OMAX). Operations Excellence: Journal of Applied Industrial Engineering, 12(2), 219–227.

Surjasa, D., Ahmad, & Irawati, E. (2017). Pengukuran kinerja supply chain CV. X berdasarkan lima proses inti model Supply Chain Operations Reference (SCOR). Jurnal Ilmiah Teknik Industri, 5(1).

Tertia, D., Handayani, S., & Effendi, Y. (2023). The factors affecting employee work productivity in the Bengkulu Province Community and Village Empowerment Service (DPMD). Jurnal Multidisiplin Dehasen (MUDE), 2(1), 63–76.

Wardoyo, P. P., & Hadi, Y. (2016). Peningkatan produktivitas UMKM menggunakan metode Objective Matrix. Jurnal Ilmiah Teknik Industri, 4(1).

Wibisono, D. (2019). Analisis produktivitas dengan menggunakan pendekatan metode Objective Matrix (OMAX) studi kasus di PT. XYZ. Jurnal Optimasi Teknik Industri (JOTI), 1(1), 1–7.